HOW IT WORKS –
Installed in bypass on the main pipeline, it allows the injection of fertilizer at a constant rate without variations in concentration.
By manually starting the pump, the fertilizer is suctioned from the tanks.
The calibration of the suctioned quantity is done by adjusting the regulating valve. Opening or closing the valve determines a greater or lesser suction of the fertilizer. The entry of the fertilizer into the flow meter positions the float at the chosen flow rate, which is directly visible on the flow meter scale. The suctioned fertilizer is then mixed with water and introduced into the irrigation system.
Filtration and fertigation
Plastic and metal filters, automatic mesh filters and advanced fertigation systems.
Veryfert
Manual Fertigation System
Technical characteristics
Supporting structure made of aluminum
PVC pipes and fittings
Booster pump with contactor for manual start
Inlet pressure gauge
Vacuum gauge
Air vent
Dosing channels including Venturi, Regulating valve, Check valve, Variable area flowmeter, Hose connector for connection to tanks Ø 20 ÷ 23 mm.
3 fertilizer injection channels with flow meter adjustable from 50 to 500 liters/hour
Main line operating pressure 2.0 ÷ 4.5 bar. For higher operating pressures, contact technical service
The pressure differential required for the suction of fertilizer through the venturi, is generated by the booster pump installed on board
Electric pump operating voltage: 3 x 400 volts – 50 Hz
Technical sheets
Fields of application
Greenhouse
Nursery
Open FieldType of crop
Not Applicable
Recyclable
Yes,the product is recyclable
